Engenharia eletrotécnica

Transcrição

1 Engenharia eletrotécnica Training systems on the generation, distribution and management of electrical energy: Power engineering training system, distribution training system Energy generation training system, renewable energy generation training system Transformer training system, high-voltage transmission lines training system, protective systems training system Energy management training system, smart grid training systems The Lucas-Nülle training systems have been designed in anticipation of the newest developments: Smart measuring instruments provided with various communication interfaces (e.g. LAN, RS485, USB) and control elements SCADA Power Engineering Lab software for the intelligent control and evaluation of "smart grids" using Soft PLC SCADA software designed for educational purposes Permits investigation of dynamically alternating loads and power generation inside the laboratory Intelligent energy management Modular integration of renewable energies into a smart grid using protective engineering Wind power plant with doubly-fed asynchronous generator (DFIG) and synchronisation to the grid Interactive multimedia training course Training systems on the generation, distribution and management of electrical energy: Power engineering trainer, distribution trainer Energy generation trainer, renewable energy generation trainer Transformer trainer, high-voltage transmission lines trainer, protective systems trainer Energy management trainer, smart grid trainers The Lucas-Nülle training systems have been designed in anticipation of the newest developments: Smart measuring instruments which avail of various communication interfaces (e.g. LAN, RS485, USB) and control elements SCADA Power Engineering Lab software for the intelligent control and evaluation of the "Smart Grid" with soft plc Didactically designed SCADA software Permits investigation of dynamically alternating loads and power generation inside the laboratory Intelligent energy management Modular integration of renewable energies into the smart grid using protective engineering Wind power plant with doubly-fed asynchronous generator (DFIG) with mains sychronisation Interactive multimedia training course Lucas Nülle GmbH Página 1/7

2 Renewable Energies Renewable Energies The move away from coal, oil and nuclear power to renewable forms of energy is gaining momentum. Today, technology has evolved to a point where solar energy, wind power, hydrogen fuel and biomass can be exploited as environmentally friendly energy sources. Throughout the world well-qualified technicians and engineers are being sought after to help keep this trend moving forward. Today, technologies are undergoing rapid change. This trend is being compounded by rising expectations in training and education. Lucas-Nülle has developed the appropriate training systems needed to cope with the ever more complex world of training and education. Lucas Nülle GmbH Página 2/7

3 EWG 2 Small wind power plant trainer EWG 2 Small wind power plant trainer Small wind power plants up to approx. 5 kw power are being deployed today for decentralised power supplies. These plants generate DC voltage. The energy can be stored in accumulator batteries using charge controllers. Inverters are used to generate AC voltage for operating consumers requiring the standard electricity supply voltage. The effects of wind power and the mechanical design of wind power stations can be emulated down to the last detail using the servo machine test stand and the software WindSim. The corresponding Interactive Lab Assistant Multimedia course imparts knowledge, provides interactive experiment setup support and allows for PC-assisted evaluation of the measurement data. Training content: Understand the design and operation of modern small wind power stations Explore the physical fundamentals from wind to wave Become familiar with different wind power station concepts Design and initial operation of a small wind power generator Operation with fluctuation wind force in off-line operation Energy storage, optimisation of the system Design of an off-grid system for the generation of AC voltage Explore hybrid systems for off-grid power supply using wind power and photovoltaic systems (wind/solar trainer) Equipamento consistindo em: 1 Controlador de carga para um pequeno aerogerador de 12 V CO3208-3E 1 2 Gerador síncrono de 12 V para turbina eólica pequena com ímanes permanentes SE2673-1M 1 Lucas Nülle GmbH Página 3/7

4 3 Painel de lâmpadas de 12 V CO3208-1K 1 4 Unidade de carga de 1 kohm, 500 W CO3208-1J 1 5 Inversor isolado 230 V, 275 VA CO3208-1F 1 6 Painel de lâmpadas de 230V CO3208-1L 1 Additionally required - Machine test bench equipment set for servo-drive/braking system: 7 Banco de ensaio da servomáquina para máquinas de 0,3 kw, incluindo software ActiveServo (D, GB, F, E) CO3636-6V 1 8 Manga de acoplamento, 0,3kW SE2662-2A 1 9 Cobertura de acoplamento, 0,1/0,3 kw, transparente SE2662-7B 1 10 QuickChart, banco de ensaio de servomáquina, instruções de segurança e operação (GB) SO6200-7D 1 Manuais e literatura: 11 Interactive Lab Assistant: Turbinas eólicas pequenas SO2800-3C 1 Lucas Nülle GmbH Página 4/7

5 Instrumentos de medição: Instrumentos de medição: 12 Multímetro analógico/digital, wattímetro e instrumento de medição do fator de potência, incluindo software CO5127-1Z 1 Acessórios: 13 Plugues de ligação de segurança 4mm com tomada, 1000V/32A CAT II SO5126-3R Conjunto de cabos de medição de segurança, 4 mm (31 condutores) SO5148-1L 1 15 Bancada de experimentação móvel, perfil de al., 3 niveis, 6 tomadas, 1250x700x1995mm ST7200-3A 1 16 Suporte para cabos de medição para parede ou para montagem em perfis de alumínio. Montagem para 48 cabos de medição ST8003-8E 1 17 Suporte de PC para bancada de experimentação SybaPro, altura e largura ajustáveis ST7200-5A 1 18 Suporte para monitor de PC (max. 15kg) com braço de fixação ao perfil de alumínio VESA 75/100 ST8010-4T 1 19 Adaptador para teclado como extensão para o suporte de tela plana ST8010-4G 1 20 Capa de proteção para bancada de experimentação móvel - 3 níveis ST8010-9Y 1 Lucas Nülle GmbH Página 5/7

6 Também recomendado: Small wind power plants for outdoors and presentation Training content: Understand the design and operation of modern, small wind power plants How to set up, put into operation and operate an authentic small wind power plant Explore the physical fundamentals from wind to shaft Set up and put into operation a small wind power generator Outdoor operation 21 Turbina eólica de pequenas dimensões 370 W, com poste de demostração CO3208-3F 1 22 Conjunto de poste para turbina eólica de pequenas dimensões CO3208-3G 1 Recommended learning management software for all LN multimedia courses: Optionally available: multi user license with 5 or 10 dongles and update to version Software, LabSoft Classroom Manager 4.0, licença única SO2001-5A 1 Lucas Nülle GmbH Página 6/7

7 24 Conjunto de tarefas Engenharia de energia/energias renováveis SO2001-6D 1 Lucas Nülle GmbH Página 7/7