ä Ì n Èx Ì Þ`À>Õ V /ÀÕV À> i

View View thousands thousands of of Crane Crane Specifications Specifications on on FreeCraneSpecs.com FreeCraneSpecs.com ä Ì n Èx Ì Þ`À>Õ V /ÀÕV À> i U ä Ì Ã n Èx Ì >Ì n vì Ó {{ À>` Õà U În {ä vì È {Ó Ç wûi ÃiVÌ ] võ «ÜiÀ >ÌV } L Ü Ì V >ÀÌi` V>«>V ÌÞ `i`õvì à v À Ìi iãv «} >`à U Îx xn vì ä Ç Ç Ç ÌÜ «ivi] L v `] L >À` >ÌÌ Vi >ÌÌ>V i Ì Ü Ì Óc] xc] Îäc] > ` {xc vvãiìã «Ì > U /Ü È vì { >ÌÌ Vi ÃiÀÌà «À Û `i > Ì Ì> >ÌÌ>V i Ì i }Ì v ä vì ÓÇ { «Ì > U ÓÎÇ vì ÇÓ Ó >Ý Õ Ì «i } Ì U `Õ >À ÃÌÞ i V Õ ÌiÀÜi } Ìà U È]nnä LÃ Ç ÈxÈ È } >Ý Õ Ü V i «Õ U {nä v«{è Î É >Ý Õ Ü V i ëii` U iýì }i ià>ì «ià>ì À½Ã V>L Ü Ì «À Ûi` Û Ã L ÌÞ > ` ià} Và U {{x «ÎÎ n 7 iìà Ì iãi i } i Ü Ì ]{xä vì Là ÈÈ v Ì ÀµÕi U < - /À V Ó Ã«ii` >ÕÌ >Ìi` > Õ> ÌÀ> à Ãà U ÈÓ Î «ää Î É À ÌÀ>Ûi ëii` U À Ì > ` Ài>À > À À `i ÃÕëi à U Ì V - LÀ> iã U ÕÀ V >L i ÃÌ À>}i L Ýià >Û> >L i U º-Ì Ü ¼» ÃÌii «Ì Ã

90-ton (81.65 mt) Hydraulic Truck Crane 90-ton (81.65 mt) Truck Terrain Crane The HTT s all-wheel steer provides outstanding on-site mobility. 90 tons (81.65 mt) at 8 ft (2.44 m) radius 38-140 ft (11.6-42.7 m) five section, full power latching boom with no charted capacity deductions for telescoping loads 35-58 ft (10.7-17.7 m) two-piece, bi-fold, on-board lattice attachment with 2, 15, 30, and 45 offsets - optional Two 16 ft (4.9 m) lattice inserts provide a total attachment length of 90 ft (27.4 m) - optional 237 ft (72.2 m) maximum tip height Modular style counterweights 16,880 lbs (7 656.6 kg) maximum winch line pull 480 fpm (146.3 m/min) maximum winch line speed Next generation operator s cab with improved visibility and ergonomics Automated Manual Transmission Front and rear air ride suspension Anti-lock (ABS) brakes Four lockable storage boxes available Stow n Go steel pontoons

90-ton (81.65 mt) Hydraulic Truck Crane Comfortable carrier : Dash-mounted comprehensive instrumentation with backlit gauges Sliding side and rear windows and roll up/down door window provides excellent ventilation Fully adjustable air-ride fabric seat Suspended pedals 35-58 ft (10.7-17.7 m) two-piece bi-fold lattice attachment with 2, 15, 30 and 45 offsets 90-ton (81.65 mt) Truck Terrain Crane 5-section full power latching boom with attachment flexibility Big, wide cab with outstanding visibility Winches deliver impressive numbers of line pull and line speed Counterweight flexibility, big engine and transmission power, along with air ride promise incredible mobility on the road or on the job All counterweight configurations can be raised and lowered by hydraulic cylinders from the comfort of the operator s cab for ease of installation and removal. Outstanding mobility on the road and on the job site Cruise control Three stage engine compression brake Ether injection system optional Automated transmission (no clutch pedal) 12 speeds forward, 2 speeds reverse with two modes of operation: fully automatic and semi-automatic Job site travel is permissible with all 39,500 lbs (17 917.2 kg) of counterweight for exceptional job site versatility: - HTC: 1.3 mph (2.1 km) job site travel - HTT: 1.2 mph (1.9 km) job site travel Highway speeds unmatched in the industry today: - HTC: up to 62.3 mph (100.3 km/hr) - HTT: up to 56.1 mph (90.2 km/hr) Boom dolly/trailer ready when equipped with optional boom float kit and rear electrical and air connections Optional rear electrical and air connections There are two standard locking storage boxes with options for up to four boxes. Raydan air-ride suspension front and rear provides a smooth ride and precise handling. Optional air-ride lift system holds the rear suspension retracted while the crane is on outriggers.

5-section full power latching boom with attachment flexibility 38-140 ft (11.6-42.7 m) latching boom with five boom modes for superior capacities throughout the extension range No charted capacity reductions for telescoping loads Boom requires no greasing because of ingenious Teflon wear pucks impregnated in the full contact wear pads No minimum boom angle for extending or retracting the boom sections 35-58 ft (10.7-17.7 m) two-piece, bi-fold, on board lattice attachment with 2, 15, 30, and 45 offsets Two 16 ft (4.9 m) lattice inserts provide a total attachment length of 90 ft (27.4 m) 237 ft (72.2 m) maximum tip height Innovative two-part paint coating technology, coupled with pre-assembly paint process, provides the finest quality coating system available today. Mechanical boom angle indicator - standard Optional integrated air conditioning Pull-out CabWalk slides out from secured travel position underneath operator s cab Folding viewing mirror for travel Optional hoist drum cable follower and optional third wrap indicators Winch viewing mirror Large engine doors allow for easy access Standard 11,500 lbs (5 216 kg) counterweight Non-slip surface strips on carrier deck Stow n Go outrigger pontoons Optional daytime running lights Self-storing fifth outrigger pontoon CALC Outrigger beams have three different stages (retracted, intermediate, and fully extended) providing lifting capacities in confined areas. Large west coast-style rear viewing mirrors Integrated air conditioning (not a roof-mounted system) Full air, S-cam anti-lock (ABS) brakes Aluminum wheels and radial tires Carrier-mounted outrigger controls located on each side of carrier, include an engine throttle-up switch for fast outrigger deployment. For fine level adjusting of the carrier, throttle can be taken down to idle. Powerful and responsive hydraulics Six pump, pressure compensated hydraulic system allows simultaneous and precise function of boom hoist, winch, and swing. Two-speed hydraulic piston motor hoist system delivers superior hoisting. Matched size optional front and rear winches provide equal max line pulls of 16,880 lbs (7 657 kg) and max line speeds of 480 fpm (143 m/min) on 16 (.41 m) root diameter grooved drums. Drum rotation indicators - standard. Bi-directional hydraulic swing motor mounted to a planetary reduction unit for 360 continuous smooth swing. Spring applied hydraulic released 360 swing park brake provides infinite swing park positions as well as free swing when control is in neutral position.

Steerable all wheel axles, in conjunction with super single tires, makes the HTT even harder to beat on the job-site. And NO changes to the on-outrigger capacity charts. Drive and steer capabilities for the rear axles Four steering modes: - Independent front - Independent rear - Combination - Crab Rear axles self-center and lock in the straight ahead position for high speed travel. Turning radius under 29 ft (8.8 m) at the edge of the tire 445/65R22.5 tires front and rear that are interchangeable Only one spare rim and tire combination is needed. Transverse (cross-axle) differential locks that greatly improve traction on unimproved job-site conditions.

Access to the engine compartments and the operator s cab is superb with strategically-located ladders and steps. Roomier and quieter operator s cab Extra large front window almost seamlessly merges into the roof window Sliding left side door, right and rear windows, and swing up top window provide excellent ventilation All gauges, switches, indicators, and controls are placed in the operators forward line of sight for excellent ergonomics All gauges and switches are backlit for excellent visibility when the cab working lights are switched to the on position Available Integrated air conditioning utilizes the same ventilation outlets as the standard heating system Integrated Microguard rated capacity limiter with color graphic display, for excellent contrast even in direct sunlight, aids the operator in safe and efficient operation by continuously monitoring a multitude of crane conditions. Optional external and internal light bars inform the operator and/or ground crew of the percentage of capacity. Multiple counterweight configurations give you capacities for any size job Standard Total of 11,500 lbs (5 216 kg) of removable counterweights. Capacities for five different counterweight configurations. Optional Up to 39,500 lbs (17 917.2 kg) of removable counterweights. Capacities for up to thirteen different counterweight configurations. All configurations can be raised and lowered by hydraulic cylinders from the comfort of the operator s cab for ease of installation and removal.

Your crane investment is always protected... with your Link-Belt distributor. When you invest in a Link-Belt crane, you invest in a legacy of outstanding customer support dating back to 1874. The ultimate value of a machine begins with state-of-the-art design and quality manufacturing, but it is the excellent Link-Belt distributor product support that determines its long term value. This philosophy has earned Link-Belt cranes the enviable position of traditionally commanding some of the highest resale prices in the industry. As a member of user s group, you will have access to: Online access to a comprehensive library of all parts, service and operator manuals for YOUR crane Interactive, live groundbearing calculations for YOUR crane Plus a vast array of information on new products, services and special offerings Link-Belt Parts Distribution Center Link-Belt headquarters - Lexington, Kentucky Link-Belt s investment in the highly acclaimed Master Technician Training Program is further testimony to its commitment to highly trained, experienced service personnel. Technical schools are specifically designed to establish proficiency in three phases: fundamentals, machine systems, and diagnostics/repair. To further support these highly trained distributor personnel, Link-Belt has dedicated, full time factory technical advisors available with comprehensive machine records, drawings and technical publications to quickly isolate and resolve service issues. No one knows your Link-Belt crane better than our trained technical specialists and coupled with the energy of our customer parts representatives, no one in the crane industry provides faster, more efficient customer service. With state of the art computer information systems, distributors order Genuine Link-Belt Parts 24 hours a day, 7 days a week. Our dedicated 72,000 sq. ft. (6 689 m 2 ) Parts Distribution Center is an integral part of our product support commitment where we invest in an extensive and well planned parts inventory. And all parts in stock ship the same business day. Link-Belt Construction Equipment Company is a leader in the design, manufacture and sales of telescopic and lattice boom cranes, with headquarters in Lexington, Kentucky. In the recent decade, a dynamic and highly focused Link-Belt has emerged as a market leader in crane design and product quality standards by focusing on continuous improvement and employee empowerment. Link-Belt s core production base and center for worldwide operations is its 500,000 sq. ft. (46 451.5 m 2 ) manufacturing facility in Lexington, Kentucky. With major expansions over the last ten years, along with continuous improvement philosophies, this facility has emerged as the most modern crane facility in North America. LINK-BELT CONSTRUCTION EQUIPMENT COMPANY Lexington, Kentucky www.linkbelt.com Link-Belt is a registered trademark. Copyright 2007. All rights reserved. We are constantly improving our products and therefore reserve the right to change designs and specifications. Litho in U.S.A. 11/07 #4344 (supersedes #4331)

5460 (supersedes 5424)--- 0506--- N3 1 Technical Data Specifications & Capacities Telescopic Boom Truck Crane 90 ton (81.6 metric ton) CAUTION: This material is supplied for reference use only. Operator must refer to in--- cab Crane Rating Manual and Operator s Manual to determine allowable crane lifting capacities and assembly and operating procedures.

5460 (supersedes 5424)---0506---N3

5460 (supersedes 5424)---0506---N3 Table Of Contents Boom, Attachments, and Upper Structure... 1 Boom... 1 Boom Wear Pads... 1 Boom Head... 1 Boom Elevation... 1 Auxiliary Lifting Sheave --- Optional... 1 Hook Blocks and Balls --- Optional... 1 Fly --- Optional... 1 Fly Extensions --- Optional... 1 Upper Operator s Cab and Controls... 2 Swing... 3 Electrical... 3 Additional Equipment... 3 Load Hoist System... 3 Load Hoist Performance... 3 2M Main and Optional Auxiliary Winches... 3 Hydraulic System... 4 Counterweight... 4 Carrier... 6 General... 6 Outriggers... 6 Steering and Axles... 6 Suspension... 6 Tires and Wheels... 6 Brakes... 6 Electrical... 6 Engine... 6 Transmission... 6 Carrier Speeds and Gradeability... 7 Fuel Tank... 7 Hydraulic System... 7 Pump Drive... 7 Lower Cab and Controls... 8 Additional Equipment... 8 Axle Loads... 9 Axle Loads with 2--Axle or 3--Axle Boom Dolly... 10 General Dimensions... 11 Working Range Diagram... 12 Boom Extend Modes... 13 Main Boom Lift Capacity Charts -- Standard... 14 8,500 lb Counterweight --- Fully Extended Outriggers --- 360 Rotation... 14 8,500 lb Counterweight --- On Tires --- Stationary --- Boom Centered Over Rear... 15 8,500 lb Counterweight --- On Tires --- Pick & Carry (1 mph) --- Boom Centered Over Rear... 15 11,500 lb Counterweight --- Fully Extended Outriggers --- 360 Rotation... 16 11,500 lb Counterweight --- On Tires --- Stationary --- Boom Centered Over Rear... 17 11,500 lb Counterweight --- On Tires --- Pick & Carry (1 mph) --- Boom Centered Over Rear... 17

5460 (supersedes 5424)---0506---N3 Main Boom Lift Capacity Charts -- Optional... 18 32,500 lb Counterweight --- Fully Extended Outriggers --- 360 Rotation... 18 32,500 lb Counterweight --- On Tires --- Stationary --- Boom Centered Over Rear... 19 32,500 lb Counterweight --- On Tires --- Pick & Carry (1 mph) --- Boom Centered Over Rear... 19 39,500 lb Counterweight --- Fully Extended Outriggers --- 360 Rotation... 20 Fly Attachment Lift Capacity Charts -- Optional... 21 8,500 lb Counterweight --- Fully Extended Outriggers --- 360 Rotation... 21 140 ft Main Boom Length --- 2 Fly Offset... 21 140 ft Main Boom Length --- 15 Fly Offset... 21 140 ft Main Boom Length --- 30 Fly Offset... 22 140 ft Main Boom Length --- 45 Fly Offset... 22 11,500 lb Counterweight --- Fully Extended Outriggers --- 360 Rotation... 23 140 ft Main Boom Length --- 2 Fly Offset... 23 140 ft Main Boom Length --- 15 Fly Offset... 23 140 ft Main Boom Length --- 30 Fly Offset... 24 140 ft Main Boom Length --- 45 Fly Offset... 24 32,500 lb Counterweight --- Fully Extended Outriggers --- 360 Rotation... 25 140 ft Main Boom Length --- 2 Fly Offset... 25 140 ft Main Boom Length --- 15 Fly Offset... 25 140 ft Main Boom Length --- 30 Fly Offset... 26 140 ft Main Boom Length --- 45 Fly Offset... 26 39,500 lb Counterweight --- Fully Extended Outriggers --- 360 Rotation... 27 140 ft Main Boom Length --- 2 Fly Offset... 27 140 ft Main Boom Length --- 15 Fly Offset... 27 140 ft Main Boom Length --- 30 Fly Offset... 28 140 ft Main Boom Length --- 45 Fly Offset... 28 Main Boom Lift Capacity Charts -- Optional (Metric)... 29 3 856kg Counterweight --- Fully Extended Outriggers --- 360 Rotation... 29 3 856kg Counterweight --- On Tires --- Stationary --- Boom Centered Over Rear... 30 3 856kg Counterweight --- On Tires --- Pick & Carry (1.6 km/h) --- Boom Centered Over Rear... 30 5 216kg Counterweight --- Fully Extended Outriggers --- 360 Rotation... 31 5 216kg Counterweight --- On Tires --- Stationary --- Boom Centered Over Rear... 32 5 216kg Counterweight --- On Tires --- Pick & Carry (1.6 km/h) --- Boom Centered Over Rear... 32 14 742kg Counterweight --- Fully Extended Outriggers --- 360 Rotation... 33 14 742kg Counterweight --- On Tires --- Stationary --- Boom Centered Over Rear... 34 14 742kg Counterweight --- On Tires --- Pick & Carry (1.6 km/h) --- Boom Centered Over Rear... 34 17 917kg Counterweight --- Fully Extended Outriggers --- 360 Rotation... 35 Fly Attachment Lift Capacity Charts -- Optional (Metric)... 36 3 856kg Counterweight --- Fully Extended Outriggers --- 360 Rotation... 36 42.67m Main Boom Length --- 2 Fly Offset... 36 42.67m Main Boom Length --- 15 Fly Offset... 36 42.67m Main Boom Length --- 30 Fly Offset... 36 42.67m Main Boom Length --- 45 Fly Offset... 36 5 216kg Counterweight --- Fully Extended Outriggers --- 360 Rotation... 37 42.67m Main Boom Length --- 2 Fly Offset... 37 42.67m Main Boom Length --- 15 Fly Offset... 37 42.67m Main Boom Length --- 30 Fly Offset... 37 42.67m Main Boom Length --- 45 Fly Offset... 37 HTC --- 8690 Link---Belt Cranes

5460 (supersedes 5424)---0506---N3 14 742kg Counterweight --- Fully Extended Outriggers --- 360 Rotation... 38 42.67m Main Boom Length --- 2 Fly Offset... 38 42.67m Main Boom Length --- 15 Fly Offset... 38 42.67m Main Boom Length --- 30 Fly Offset... 39 42.67m Main Boom Length --- 45 Fly Offset... 39 17 917kg Counterweight --- Fully Extended Outriggers --- 360 Rotation... 40 42.67m Main Boom Length --- 2 Fly Offset... 40 42.67m Main Boom Length --- 15 Fly Offset... 40 42.67m Main Boom Length --- 30 Fly Offset... 41 42.67m Main Boom Length --- 45 Fly Offset... 41

5460 (supersedes 5424)---0506---N3 This Page Intentionally Blank HTC --- 8690 Link---Belt Cranes

5460 (supersedes 5424)---0506---N3 1 Boom, Attachments, and Upper Structure J Boom Design --- Five section, formed construction of extra high tensile steel consisting of one base section and four telescoping sections. The two plate design of each section has multiple longitudinal bends for superior strength. Each telescoping section extends independently by means of one double---acting, single stage hydraulic cylinder with integrated holding valves. Boom S 38---140 ft (11.6---42.7m) five section boom S Integral boom dolly connection S Five boom extend modes (EM1 through EM5), controlled from the operator s cab, provide superior capacities by varying the extension of the telescoping sections: S EM1 extends to 140.0 ft (42.7m) S EM2 extends to 127.3 ft (38.8m) S EM3 extends to 115.8 ft (35.3m) S EM4 extends to 102.0 ft (31.1m) S EM5 extends to 76.5 ft (23.3m) S Mechanical boom angle indicator S Maximum tip height for each extend mode is: S EM1 is 148 ft (45.1m) S EM2 is 135 ft (41.1m) S EM3 is 124 ft (37.8m) S EM4 is 110 ft (33.5m) S EM5is84ft(25.6m) Boom Wear Pads S Wear pads with Teflon inserts that self---lubricate the boom sections S Bottom wear pads are universal for all boom sections S Top wear pads are universal for all boom sections Boom Head S Five 16.5 in (41.9cm) root diameter nylon sheaves to handle up to ten parts of line S Easily removable wire rope guards S Rope dead end lugs on each side of the boom head S Boom head is designed for quick---reeve of the hook block Boom Elevation S One double acting hydraulic cylinder with integral holding valve S Boom elevation: ---3 to 80 Auxiliary Lifting Sheave --- Optional S Single 16.5 in (41.9m) root diameter nylon sheave S Easily removable wire rope guards S Does not affect erection of the fly or use of the main head sheaves Hook Blocks and Balls --- Optional S 40 ton (36.3mt) 4 sheave quick---reeve hook block with safety latch S 60 ton (54.4mt) 4 sheave quick---reeve hook block with safety latch S 90 ton (81.6mt) 6 sheave quick---reeve hook block with safety latch S 8.5 ton (7.7mt) swivel and non---swivel hook balls with safety latch S 10 ton (9.1mt) swivel and non---swivel hook balls with safety latch Fly --- Optional S 35 ft (10.7m) one piece lattice fly, stowable, offsettable to 2, 15, 30, and45. Maximum tip height is 182 ft (55.5m). S 35 ft---58 ft (10.7---17.7m) two piece bi---fold lattice fly, stowable, offsettable to 2, 15, 30, and 45. Maximum tip height is 205 ft (62.5m). Fly Extensions --- Optional S One 16 ft (4.9m) lattice extension, equipped with two 16.5 in (41.9cm) root diameter nylon sheaves, to be mounted between the boom head and fly options. Maximum tip height is 221 ft (67.4m). S Two16ft(4.9m) lattice extensions, one equipped with two 16.5 in (41.9cm) root diameter nylon sheaves, to be mounted between the boom head and fly options. Maximum tip height is 237 ft (72.2m). Minimum of 14,500 lb (6 577.1kg) of counterweight required.

2 5460 (supersedes 5424)---0506---N3 J Upper Operator s Cab and Controls Environmental Cab --- Fully enclosed, one person cab of galvaneal steel structure with acoustical insulation. Equipped with: S Tinted and tempered glass windows S Extra---large fixed front window with windshield wiper and washer S Swing up roof window with windshield wiper S Sliding left side door with large fixed window S Sliding rear and right side windows for ventilation S Six way adjustable, cushioned seat with seat belt and storage compartment S Engine dependent warm---water heater with air ducts for front windshield defroster and cab floor S Defroster fan for the front window S Bubble level S Circulating fan S Adjustable sun visor S Dome light S Cup holder S Fire extinguisher S Left side viewing mirror S Pull---out cabwalk S Two position travel swing lock Air Conditioning --- Optional --- Integral with cab heating system utilizing the same ventilation outlets Armrest Controls --- Two dual axis hydraulic joystick controllers or optional single axis hydraulic controllers for: S Swing S Boom hoist S Main rear winch S Auxiliary front winch --- optional S Drum rotation indication S Drum rotation indicator activation switch S Winch high/low speed and disable switch(es) S Third wrap selector switch --- optional S Counterweight handling switch S Telescopic override switches S Warning horn button Outrigger Controls --- Hand held control box with umbilical cord gives the operator the freedom to view operation while setting the outriggers. Foot Controls S Boom telescope S Swing brake S Engine throttle Right Front Console --- Controls and indicators for: S Engine ignition S Heating controls S Engine throttle lock S Console dimmer switch S Pump enable S Bubble level S Function disable S 12 volt power connection S Swing park brake S Air conditioning --- optional S Front windshield wiper S Boom floodlight --- optional and washer S Rotating beacon/strobe S Cab floodlights light --- optional S Warning horn Cab Instrumentation --- Ergonomically positioned, analog instrumentation for crane operation including: S Check and stop engine indicators S Engine coolant temperature with warning indicator S Hydraulic oil temperature with warning indicator S Low air pressure warning indicator S Fuel level with warning indicator S Tachometer Rated Capacity Limiter --- Microguard 540 color graphic audio---visual warning system integrated into the dash with anti---two block and function limiter. Operating data available includes: S Crane configuration S Boom length and angle S Boom head height S Allowed load and % of allowed load S Boom angle S of load S Actual load S Counterweight removal S Operator settable alarms (include): S Maximum and minimum boom angles S Maximum and minimum tip height S Maximum boom length S Left/right swing positions S Operator defined area (imaginary plane) Integrated Third Wrap Indicator --- Optional --- Microguard color display visually and audibly warns the operator when the wire rope is on the first/bottom layer and when the wire rope is down to the last three wraps. Internal RCL Light Bar --- Optional --- Visually informs the operator when crane is approaching maximum load capacity with a series of green, yellow, and red lights. External RCL Light Bar --- Optional --- Visually informs the ground crew when crane is approaching maximum load capacity with a series of green, yellow, and red lights.

5460 (supersedes 5424)---0506---N3 J Swing Motor/Planetary --- Bi---directional hydraulic swing motor mounted to a planetary reducer for 360 continuous smooth swing at 1.7 rpm. Swing Park Brake --- 360, electric over hydraulic, (spring applied/hydraulic released) multi---disc brake mounted on the speed reducer. Operated by a switch from the operator s cab. Swing Brake --- 360, foot operated, hydraulic applied disc brake mounted to the speed reducer. Swing Lock --- Two---position swing lock (boom over front or rear) operated from the operator s cab. 360 Positive Swing Lock --- Optional --- Meets New York City requirement. J Electrical Swing Alarm --- Audio warning device signals when the upper is swinging. Lights S Two working lights on front of the cab S One rotating amber beacon on top of the cab --- optional S One amber strobe beacon on top of the cab --- optional S Boom floodlight --- optional J Additional Equipment S Left side aluminum storage box 3 J Load Hoist System Load Hoist Performance Main (Rear) and Auxiliary (Front) Winches --- 3/4in(19mm) Rope Maximum Line Pull Normal Line Speed High Line Speed Layer Total Layer lb kg ft/min m/min ft/min m/min ft m ft m 1 16,880 7 656.6 179 54.6 356 108.5 114 34.7 114 34.7 2 15,519 7 039.3 195 59.4 387 118.0 124 37.8 238 72.5 3 14,362 6 514.5 211 64.3 418 127.4 134 40.8 372 113.4 4 13,365 6 062.3 226 68.9 449 136.9 144 43.9 516 157.3 5 12,497 5 668.5 242 73.8 480 146.3 154 46.9 670 204.2 6 --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- 164 50.0 834 254.2 Maximum Diameter Wire Rope Application Type Permissible Load in mm lb kg Main (Rear) Winch Standard 3/4 19 18x19 rotation resistant --- right regular lay (Type RB) 12,920 5 860.5 Optional 3/4 19 36x7 rotation resistant --- right regular lay (Type ZB) 15,600 7 076.2 Auxiliary (Front) Winch Standard 3/4 19 18x19 rotation resistant --- right regular lay (Type RB) 12,920 5 860.5 Optional 3/4 19 36x7 rotation resistant --- right regular lay (Type ZB) 15,600 7 076.2 2M Main and Optional Auxiliary Winches S Axial piston, full and half displacement (2---speed) motors driven through planetary reduction unit for positive control under all load conditions. S Grooved lagging S Power up/down mode of operation S Hoist drum cable follower --- optional S Drum rotation indicator S Drum diameter: 16 in (40.6cm) S Rope length: S Main: 730 ft (222.5m) S Auxiliary: 600 ft (182.9m) or 730 ft (222.5m) S Maximum rope storage: 834 ft (254.2m) S Terminator style socket and wedge Third wrap indicator --- optional --- Visually and audibly warns the operator when the wire rope is on the bottom layer and when the wire rope is down to the last three wraps.

4 5460 (supersedes 5424)---0506---N3 J Hydraulic System All circuits of the hydraulic system are pressure compensated. Counterbalance Valves --- All hoist motors, boom extend cylinders, and boom hoist cylinders are equipped with counterbalance valves to provide load lowering and to prevent accidental load drop if hydraulic power is suddenly reduced. Hydraulic Oil Coolers --- Two carrier mounted coolers remove heat from the hydraulic oil. One is integral to the engine radiator/charge air cooler and the other is mounted in left side access ladder. Boom Hoist Float Valves (Optional) --- For transporting the boom over the rear of the crane with a boom dolly. Allows hydraulic oil within the boom hoist cylinder to flow between piston side and case side, allowing the boom to float while on the boom dolly. Swing Brake Release --- For transporting the boom over the rear of the crane with a boom dolly. Holds the 360º swing park brake in the released position allowing free rotation of the upper structure. J Counterweight Standard --- Total of 11,500 lb (5 216kg) of total counterweight consisting of three, hydraulically removable counterweights. Assembled and disassembled by hydraulic cylinders controlled from the operator s cab with capacities for: S 0lb(0kg) counterweight S 2,500 lb (1 134.0kg) counterweight S 5,500 lb (2 494.8kg) counterweight S 8,500 lb (3 855.5kg) counterweight S 11,500 lb (5 216.3kg) counterweight Optional --- 15,000 lb (6 803.9kg) in addition to standard counterweight for a total of 26,500 lb (12 020.2kg) with additional capacities for: S 14,500 lb (6 577.1kg) counterweight S 20,500 lb (9 298.6kg) counterweight S 23,500 lb (10 659.4kg) counterweight S 26,500 lb (12 020.2kg) counterweight Optional --- 21,000 lb (9 525.4kg) in addition to standard counterweight for a total of 32,500 lb (14 741.8kg) with additional capacities for: S 14,500 lb (6 577.1kg) counterweight S 17,500 lb (7 937.9kg) counterweight S 20,500 lb (9 298.6kg) counterweight S 23,500 lb (10 659.4kg) counterweight S 26,500 lb (12 020.2kg) counterweight S 29,500 lb (13 381.0kg) counterweight S 32,500 lb (14 741.8kg) counterweight Optional --- 28,000 lb (12 700.6kg) in addition to standard counterweight for a total of 39,500 lb (17 916.9kg) with additional capacities for: S 14,500 lb (6 577.1kg) counterweight S 17,500 lb (7 937.9kg) counterweight S 20,500 lb (9 298.6kg) counterweight S 23,500 lb (10 659.4kg) counterweight S 26,500 lb (12 020.2kg) counterweight S 29,500 lb (13 381.0kg) counterweight S 32,500 lb (14 741.8kg) counterweight S 39,500 lb (17 916.9kg) counterweight* Low speed jobsite travel is offered for these optional counterweight configurations and a boom dolly or boom trailer may be required for on---highway travel. * Overall width of the crane increases to 11 ft (3.4m) for this counterweight configuration

5460 (supersedes 5424)---0506---N3 5 3,000 lb (1 360.8kg) Top 6,000 lb (2 721.6kg) Piece 2,500 lb (1 134.0kg) Tray 3,000 lb (1 360.8kg) Top 6,000 lb (2 721.6kg) Piece 2,500 lb (1 134.0kg) Tray 11,500 lb (5 216.3kg) 26,500 lb (12 020.2kg) 3,000 lb (1 360.8kg) Piece 12,000 lb (5 443.1kg) Piece 3,000 lb (1 360.8kg) Top 3,000 lb (1 360.8kg) Piece 3,000 lb (1 360.8kg) Top 7,000 lb (3 175.2kg) 2---Pieces 6,000 lb (2 721.6kg) Piece 2,500 lb (1 134.0kg) Tray Counterweight Usage Configurations Counterweight Packages Counterweight Modules 6,000 lb (2 721.6kg) Piece 2,500 lb (1 134.0kg) 32,500 lb (14 741.8kg) Tray 39,500 lb (17 916.9kg) 0lb (0kg) 2,500 lb (1 134.0kg) Tray 2,500 lb (1 134.0kg) X 12,000 lb (5 443.1kg) Piece 6,000 lb (2 721.6kg) Piece 11,500 lb (5 216.3kg) --- Standard 6,000 lb (2 721.6kg) Piece 26,500 (12 020.2kg) ---Optional 32,500 (14 741.8kg) ---Optional 3,000 lb (1 360.8kg) Top 5,500 lb (2 494.8kg) X X 8,500 lb (3 855.5kg) X X 11,500 lb (5 216.3kg) X X X 39,500 (17 916.9kg) ---Optional 3,000 lb (1 360.8kg) Piece 14,500 lb (6 577.1kg) X X X X 12,000 lb (5 443.1kg) Piece 6,000 lb (2 721.6kg) Piece 17,500 lb (7 937.9kg) X X X X 20,500 lb (9 298.6kg) X X X X X 23,500 lb (10 659.4kg) X X X X 26,500 (12 020.2kg) X X X X X 29,500 lb (13 381.0kg) X X X X X 32,500 (14 741.8kg) X X X X X X 3,000 lb (1 360.8kg) Piece 12,000 lb (5 443.1kg) Piece 6,000 lb (2 721.6kg) Piece 7,000 lb (3 175.2kg) 2---Pieces 39,500 (17 916.9kg) X X X X X X X

6 5460 (supersedes 5424)---0506---N3 Carrier J General S 8ft6in(2.6m)wide S 23 ft 10 in (7.26m) wheelbase (centerline of first axle to centerline of fourth axle) S Frame --- Box---type, torsion resistant, welded construction made of high tensile steel. Equipped with front and rear towing and tie---down lugs, tow connections, and access ladders. J Outriggers Boxes --- Two double box, front and rear welded to the carrier frame Beams and Jacks --- Four dual stage beams with Confined Area Lifting Capacities (CALC) provide selectable outrigger extensions of full, intermediate, and retracted positions. Jacks with integral check valves, hydraulically controlled from the operator s cab and on both sides of carrier. A fifth front bumper outrigger with integral check valves is hydraulically controlled from the operator s cab and at the front bumper of carrier. Pontoons --- Four lightweight, stow n go, 23.5 x 27.25 (59.7 x 69.2cm) hexagonal steel pontoons with a contact area of 485 in 2 (3 129cm 2 ) can be stored for road travel in either the storage racks on the carrier or under the outrigger boxes. Main Jack Reaction --- 106,000 lb (48 080.8kg) forceand 217 psi (1 496.2kPa) ground bearing pressure J Steering and Axles S Sheppard full integral master gear/slave gear steering system provides hydraulic assisted steering with mechanical link between steering wheel and wheels S Drive --- 8 x 4 for on/off---highway travel S Axle 1 & 2 --- Tandem steered, non---driven S Axle 3 & 4 --- Tandem non---steered, driven with reduction: 5.38 to 1 S Inter---Axle Differential Lock --- Traction adding device that locks axle 3 with axle 4. Operated by a switch from the carrier cab. J Suspension Front --- Raydan Air Link walking beam air suspension Rear --- Raydan Air Link walking beam air suspension S Axle Lift System --- Optional --- Improves rear tire ground clearance when the crane is up on outriggers. The rear tandem axles are raised and lowered with a switch in the carrier cab. The axle lift system can be controlled with a switch on both sides of the carrier. J Tires and Wheels Front --- Four (single) 445/65R22.5 tires on aluminum disc wheels Rear --- Eight (dual) 12R22.5 tires on aluminum disc wheels S Spare tires and wheels --- optional S Tire inflation kit --- optional J Brakes Service --- Full air anti ---lock (ABS) brakes on all wheel ends. Dual circuit compressed air system with air dryer. Parking/Emergency --- Spring loaded type, acting on 3rd and 4th axles automatically apply when air pressure drops below 40 psi (275.8kPa) in both circuits. J Electrical Battery --- Three batteries provide 12 volt starting and operation Lights S Front lighting includes two main headlights, two high beam lights, two parking/directional indicators, and three cab marker lights. S Side lighting includes three parking/directional indicators per side. S Rear lighting includes two parking/directional indicators, two parking/brake lights, two reverse lights, three marker lights, and a license plate light. S Other equipment includes hazard/warning system, cab light, instrument panel light, and signal horn. S One amber strobe beacon on top of the cab --- optional S Daytime running lights --- optional J Engine Specification Detroit Diesel Series 60 Numbers of cylinders 6 Cycle 4 Bore and Stroke: inch (mm) 5.12 x 6.30 (130x160) Piston Displacement: in 3 (L) 778 (12.7) Max. Brake Horsepower: hp (kw) 445 (331.8) @ 1,800 rpm 430 (320.7) @ 2,100 rpm Peak Torque: ft lb (J) 1,450 (1 966.1) @ 1,200 rpm Alternator: volts --- amps 12 --- 130 Crankcase Capacity: qt (L) 32 (30.3) S S S S S Cruise control Three--- stage engine compression brake Thermostatically controlled, hydraulically driven radiator fan 120 volt engine block heater Ether injection system --- optional J Transmission Automated --- ZF AS---TRONIC (no clutch pedal) manual transmission with 12 forward gears and 2 reverse gears.

5460 (supersedes 5424)---0506---N3 7 J Carrier Speeds and Gradeability ZF Astronic Governed Speed Gradeability (@ Peak Torque Except Creep @ Idle) Gear Ratio mph km/h % Grade 12th 0.778 62.3 100.3 2.1 11th 1.000 48.5 78.1 3.1 10th 1.267 38.3 61.6 4.2 9th 1.629 29.8 48.0 5.8 8th 2.101 23.1 37.2 7.8 7th 2.700 18.0 29.0 10.2 6th 3.552 13.7 22.0 13.7 5th 4.565 10.6 17.1 17.8 4th 5.784 8.4 13.5 22.8 3rd 7.435 6.5 10.5 29.5 2nd 9.590 5.1 8.2 38.2 1st 12.326 3.9 6.3 49.3 Reverse (Low) 11.413 4.3 6.9 45.6 Reverse (High) 8.880 5.5 8.9 35.3 1st @ 700 rpm 12.326 1.3 2.1 20.9 Rev. (Low) @ 700 rpm 11.413 1.4 2.3 19.3 Rev. (High) @ 700 rpm 8.880 1.8 2.9 14.9 Based on a gross vehicle weight of 95,000 lb (43 091.3kg) J Fuel Tank One 95 gal (359.6L) capacity tank J Hydraulic System All functions are hydraulically powered allowing positive, precise control with independent or simultaneous operation of all functions. Main Pumps S Three fixed displacement gear pumps with automatic disconnect for the main and auxiliary winches, swing, boom hoist, control circuit, and telescope for use when pick & carry switch is in travel mode. S One fixed displacement gear pump for steering and the front bumper outrigger S Two fixed displacement gear pumps for engine cooling fan and main outriggers. These pumps also provide flow to the winches and boom hoist for pick & carry mode. Operated by a switch in the carrier cab. S Combined pump capacity of 188 gpm (711.7Lpm) Hydraulic Reservoir --- 144 gal (545.1L) capacity equipped with sight level gauge. Diffusers built in for deaeration. Filtration --- One 10 micron, full flow, return line filter. All oil is filtered prior to return to reservoir. Accessible for easy filter replacement. J Pump Drive All pumps are mechanically driven by the diesel engine. Main and auxiliary winches, swing, boom hoist, control circuit, and telescope pumps are mounted to an automatic pump disconnect on the rear of the transmission to aid in cold weather starting as well as to reduce pump wear while traveling.

8 5460 (supersedes 5424)---0506---N3 J Lower Cab and Controls Environmental Cab --- Fully enclosed, one person cab of composite structure with acoustical insulation. Equipped with: S Tinted and tempered glass windows S Roll down left side window for ventilation S Sliding rear and right side windows for ventilation S Windshield wiper and washer S Six way adjustable and air suspended driver s seat with seat belt S Two adjustable rear view mirrors S Engine dependent warm---water heater with air ducts for windshield defroster and cab floor S Adjustable sun visor S Dome light S 12 volt connection S Fire extinguisher Air Conditioning --- Optional --- Integral with cab heating system utilizing the same ventilation outlets Cab Instrumentation --- Ergonomically positioned analog instrumentation for driving including: S Speedometer with odometer, hourmeter, trip odometer, and clock S Front and rear air pressure with warning indicator S Engine coolant temperature with warning indicator S Engine oil pressure with warning indicator S Voltage indicator with warning indicator S Fuel level S Tachometer Right Side Console --- Controls and indicators for: S Transmission gear shifting S Transmission digital readout S Cruise controls S Engine compression brake controls Dash Mounted Controls For: S Windshield wiper and washer S Carrier lights S Carrier/upper throttle control S Engine cooling fan override S Cab heater/air conditioning S Console dimmer switch S Engine diagnostic switch S Park brake S Engine ignition S Pick & carry switch Dash Mounted Indicator For: S Check and stop engine S Turn signal indication S Park brake S Cruise activation S High beam headlights S Check anti---lock brake system Foot Controls For: S Carrier service brakes S Engine throttle J Additional Equipment Standard: S Aluminum full deck fenders with mud flaps S Left and right bubble levels S Air hose connection ports S Clearance flags Optional: S Pneumatic and electrical quick disconnect connectors mounted on the rear for trailer or boom dolly brakes and lights S Left side aluminum storage box S Rear mounted pintle hook

5460 (supersedes 5424)---0506---N3 9 Axle Loads Base crane with full tank of fuel and no counterweight Gross Vehicle Weight ( 1 ) Front Axles Rear Axles lb kg lb kg lb kg 79,206 35 927 34,938 15 848 44,268 20 080 Driver in carrier cab 250 113 315 143 --- 65 --- 29 Rear pintle hook 13 6 ---6 ---3 19 8 Pneumatic and electrical connectors for trailer or boom dolly 11 5 ---4 ---2 15 7 Carrier aluminum storage box 59 27 28 13 31 14 Air ride lift system --- rear axles 48 22 0 0 48 22 Ether injection 13 6 12 5 1 1 Air conditioning --- carrier 45 20 55 25 --- 10 --- 4 Hoist drum follower --- main 69 31 ---35 ---16 104 47 Auxiliary winch with 600 ft (182.9m) of 3/4 (19mm) type RB rope 731 332 ---239 ---108 970 440 Hoist drum follower --- auxiliary 69 31 ---21 ---10 90 41 Substitute 600 ft (182.9m) of rope with 730 ft (222.5m) of rope --- auxiliary 163 74 ---54 ---24 217 98 Remove 730 ft (222.5m) of rope from rear (main) winch --- 931 ---422 373 169 --- 1,304 ---591 Remove 600 ft (182.9m) of rope from front (auxiliary) winch --- 768 ---348 252 114 --- 1,020 ---463 Upper aluminum storage box 42 19 ---4 ---2 46 21 Air conditioner --- operator s cab 220 100 ---7 ---3 227 103 360 mechanical swing lock 140 64 21 9 119 54 2,500 lb (1 134.0kg) counterweight tray on upper 2,544 1 154 --- 1,255 ---569 3,799 1723 3,000 lb (1 360.8kg) counterweight on upper 2,981 1 352 --- 1,471 ---667 4,452 2019 6,000 lb (2 721.6kg) counterweight on upper 6,000 2 722 --- 2,961 ---1 343 8,961 4065 6,000 lb (2 721.6kg) counterweight on upper 6,000 2 722 --- 2,961 ---1 343 8,961 4065 12,000 lb (5 443.1kg) counterweight on upper 12,050 5 466 --- 5,947 ---2 697 17,997 8163 3,000 lb (1 360.8kg) top counterweight on upper 3,009 1 365 --- 1,485 ---674 4,494 2038 Floodlight to the front of boom base section 7 3 6 3 1 1 Fly mounting brackets to boom base section for fly options 176 80 136 62 40 18 35 ft (10.7m) offsettable, one--- piece lattice fly --- stowed 1,591 722 1,539 698 52 24 35--- 58 ft (10.7---17.7m) offsettable, two--- piece (bi--- fold) lattice fly --- stowed 2,263 1 026 1,886 855 377 171 Auxiliary lifting sheave 110 50 200 91 ---90 ---41 40 ton (36.3mt) 4--- sheave hook block at front bumper 900 408 1,570 712 --- 670 ---304 60 ton (54.4mt) 4--- sheave hook block at front bumper 1,109 503 1,935 878 --- 826 ---375 90 ton (81.6mt) 6--- sheave hook block at front bumper 1,554 705 2,711 1 230 --- 1,157 ---525 8.5 ton (7.7mt) hook ball at front bumper 360 163 628 285 ---268 ---122 10 ton (9.1mt) hook ball at front bumper 580 263 1,012 459 ---432 ---196 Counterweight Load Transfer Front Axles Rear Axles lb kg lb kg Transfer 2,500 lb (1 134.0kg) counterweight tray to carrier deck 3,194 1 449 --- 3,194 ---1 449 Transfer 3,000 lb (1 360.8kg) counterweight to carrier deck 3,742 1 697 --- 3,742 ---1 697 Transfer 6,000 lb (2 721.6kg) counterweight to carrier deck 7,532 3 416 --- 7,532 ---3 416 Transfer 6,000 lb (2 721.6kg) counterweight to carrier deck 7,532 3 416 --- 7,532 ---3 416 Transfer 12,000 lb (5 443.1kg) counterweight to carrier deck 15,128 6 862 --- 15,128 ---6 862 Transfer 3,000 lb (1 360.8kg) top counterweight to carrier deck 3,778 1 714 --- 3,778 ---1 714 Axle Front Rear Maximum Load @ 65 mph (105km/h) 46,400 lb (21 047kg) --- aluminum disc wheels with 445/65R22.5 tires 52,000 lb (23 587kg) --- aluminum disc wheels with 12R22.5 tires ( 1 ) Adjust gross vehicle weight and axle loading according to component weight. All weights are ±3%.

10 5460 (supersedes 5424)---0506---N3 Axle Loads with 2-- Axle or 3-- Axle Boom Dolly Base crane with full tank of fuel and no counterweight Gross Vehicle Weight ( 1 ) Front Axles Rear Axles Dolly Axles lb kg lb kg lb kg lb kg 79,206 35 927 29,457 13 361 35,680 16 184 14,069 6 382 Nelson 2--- axle boom dolly 6,000 2 722 0 0 0 0 6,000 2 722 Nelson 3--- axle boom dolly 9,000 4 082 0 0 0 0 9,000 4082 Driver in carrier cab 250 113 315 143 ---65 ---29 0 0 Rear pintle hook 13 6 --- 6 --- 3 19 8 0 0 Pneumatic and electrical connectors for trailer or boom dolly 11 5 ---4 ---2 15 7 0 0 Carrier aluminum storage box 59 27 28 13 31 14 0 0 Air ride lift system --- rear axles 48 22 0 0 48 22 0 0 Ether injection 13 6 12 5 1 1 0 0 Air conditioning --- carrier 45 20 55 25 ---10 ---4 0 0 Hoist drum follower --- main 69 31 53 24 16 7 0 0 Auxiliary winch with 600 ft (182.9m) of 3/4 (19mm) type RB rope 731 332 435 197 296 134 0 0 Hoist drum follower --- auxiliary 69 31 40 18 29 13 0 0 Substitute 600 ft (182.9m) of rope with 730 ft (222.5m) of rope --- auxiliary 163 74 97 44 66 30 0 0 Remove 730 ft (222.5m) of rope from rear (main) winch ---931 ---422 ---623 ---282 ---308 ---140 0 0 Remove 600 ft (182.9m) of rope from front (auxiliary) winch ---768 ---348 ---458 ---208 ---310 ---140 0 0 Upper aluminum storage box 42 19 15 7 27 12 0 0 Air conditioner --- operator s cab 220 100 66 30 154 70 0 0 360 mechanical swing lock 140 64 17 8 123 56 0 0 2,500 lb (1 134.0kg) counterweight tray on carrier deck 2,544 1 154 1,938 879 606 275 0 0 3,000 lb (1 360.8kg) counterweight on carrier deck 2,981 1 352 2,271 1 030 710 322 0 0 6,000 lb (2 721.6kg) counterweight on carrier deck 6,000 2 722 4,571 2 074 1,429 648 0 0 6,000 lb (2 721.6kg) counterweight on carrier deck 6,000 2 722 4,571 2 074 1,429 648 0 0 12,000 lb (5 443.1kg) counterweight on carrier deck 12,050 5 466 9,181 4 164 2,869 1 301 0 0 3,000 lb (1 360.8kg) top counterweight on upper 3,009 1 365 2,293 1 040 716 325 0 0 Flood light to the front of boom base section 7 3 1 1 1 1 5 2 Fly mounting brackets to boom base section for fly options 176 80 30 14 30 14 116 53 35 ft (10.7m) offsettable, one--- piece lattice fly --- stowed 1,591 722 168 76 170 77 1,253 568 35--- 58 ft (10.7---17.7m) offsettable, two--- piece (bi--- fold) lattice fly --- stowed 2,263 1 026 339 154 342 155 1,583 718 Two 16 ft (4.9m) lattice inserts (stowed on 3--- axle boom dolly) 1,584 718 0 0 0 0 1,584 718 Auxiliary lifting sheave 110 50 ---19 ---9 ---19 ---9 149 67 40 ton (36.3mt) 4--- sheave hook block at boom head 900 408 --- 134 ---61 --- 135 ---61 1,169 530 60 ton (54.4mt) 4--- sheave hook block at boom head 1,109 503 --- 165 ---75 --- 167 ---76 1,441 654 90 ton (81.6mt) 6--- sheave hook block at boom head 1,554 705 --- 231 ---105 --- 233 ---106 2,019 916 8.5 ton (7.7mt) hook ball at boom head 360 163 ---54 ---24 ---54 ---25 468 212 10 ton (9.1mt) hook ball at boom head 580 263 ---87 ---39 ---87 ---39 754 342 Counterweight Load Transfer Front Axles Rear Axles Dolly Axles lb kg lb kg lb kg Transfer 3,000 lb (1 360.8kg) counterweight to the boom dolly --- 2,271 ---1 030 --- 710 ---322 2,981 1352 Transfer 6,000 lb (2 721.6kg) counterweight to the boom dolly --- 4,571 ---2 074 --- 1,429 ---648 6,000 2722 Transfer 6,000 lb (2 721.6kg) counterweight to the boom dolly --- 4,571 ---2 074 --- 1,429 ---648 6,000 2722 Transfer 12,000 lb (5 443.1kg) counterweight to the boom dolly --- 9,181 ---4 164 --- 2,869 ---1 301 12,050 5466 Transfer 3,000 lb (1 360.8kg) top counterweight to the boom dolly --- 2,293 ---1 040 --- 716 ---325 3,009 1365 Axle Front Rear Maximum Load @ 65 mph (105km/h) 46,400 lb (21 047kg) --- aluminum disc wheels with 445/65R22.5 tires 52,000 lb (23 587kg) --- aluminum disc wheels with 12R22.5 tires ( 1 ) Adjust gross vehicle weight and axle loading according to component weight. All weights are ±3%.

5460 (supersedes 5424)---0506---N3 11 General Dimensions 38 0 (11.58m) 45 7 (13.89m) C L OF ROTATION 7 0 (2.13m) 11 6.50 (3.52m) 7 (17.78cm) 10 11 (3.33m) 6 2.50 (1.89m) 16 17 4.50 (114mm) 10.75 (0.27m) Ground Clearance 5 1 (1.55m) 11 0 (3.35m) 9 6 (2.90m) 5 1.50 (1.56m) 8 0.50 (2.44m) 4 2 (1.27m) 14 8 (4.47m) 5 0 (1.52m) 5 9 (1.75m) 34 (0.86m) Turning English Metric Wall to wall over carrier 48 4 14.7m Wall to wall over boom 49 2 15.0m Wall to wall over boom attachment 51 0 15.5m Curb to curb 44 1 13.4m Centerline of tire 43 4 13.2m Tail Swing English Metric With counterweight 13 8 4.2m Without counterweight 13 1 4.0m Overall Width English Metric With up to 32,500 lb (14 741.8kg) counterweight 8 6 2.6m With 39,500 lb (17 916.9kg) counterweight 11 0 3.4m 14.25 (0.36m) 22.75 (0.58m) 14.25 (0.36m) 7 9 (2.36m) FULLY RETRACTED 9 8 (2.95m) FULLY RETRACTED 8.50 (0.22m) GROUND LEVEL WITH CRANE ON OUTRIGGERS 14 7 (4.45m) INTERMEDIATE EXTENDED 16 7 (5.05m) INTERMEDIATE EXTENDED 24 0 (7.32m) FULLY EXTENDED 26 0 (7.92m) FULLY EXTENDED Not To Scale

12 5460 (supersedes 5424)---0506---N3 Working Range Diagram Height In Feet (Meters) Above Ground 250 (76.2) 240 (73.2) 230 (70.1) 220 (67.1) 210 (64.0) 200 (61.0) 190 (57.9) 180 (54.9) 170 (51.8) 160 (48.8) 150 (45.7) 140 (42.7) 130 (39.6) 120 (36.6) 110 (33.5) 100 (30.5) 90 (27.4) 80 (24.4) 70 (21.3) 60 (18.3) 50 (15.2) 40 (12.2) 30 (9.1) 20 (6.1) 10 (3.0) 10 (3.0m) 9 1 (2.8m) 10_ 20_ 30_ 40_ 50_ 45_ Offset 30_ Offset 60_ 15_ Offset 70_ 2_ Offset 140 + 90 (42.7m + 27.4m) 140 + 74 (42.7m + 22.6m) 140 + 58 (42.7m + 17.7m) 140 + 35 (42.7m + 10.7m) 115.8 + 58 (35.3m + 17.7m) 115.8 + 35 (35.3m + 10.7m) 140 (42.7m) 130 (39.6m) 120 (36.6m) 110 (33.5m) 100 (30.5m) 90 (27.4m) 80 (24.4m) 70 (21.3m) 60 (18.3m) 50 (15.2m) 38 (11.6m) 80 Max Boom Angle Boom Length Boom + Fly Length 0 230 (70.1) 220 (67.1) 210 (64.0) 200 (61.0) 190 (57.9) 180 (54.9) 170 (51.8) 150 (45.7) 130 (39.6) 110 (33.5) 90 (27.4) 70 (21.3) 160 (48.8) 140 (42.7) 120 (36.6) 100 (30.5) 80 (24.4) 60 (18.3) Operating From Axis Of Rotation In Feet (Meters) 50 (15.2) 40 (12.2) 30 (9.1) 20 (6.1) 10 (3.0) C L Of Rotation

5460 (supersedes 5424)---0506---N3 13 Boom Extend Modes Boom Length Section Length ft m T4 T3 T2 T1 50 15.2 50% 60 18.3 91% 70 21.3 100% 31% 80 24.4 100% 71% 90 27.4 100% 100% 11% 100 30.5 100% 100% 49% 110 33.5 100% 100% 88% 120 36.6 100% 100% 100% 25% 130 39.6 100% 100% 100% 63% 140 42.7 100% 100% 100% 100% Boom Length Section Length ft m T4 T3 T2 T1 50 15.2 48% 2% 60 18.3 48% 42% 70 21.3 48% 82% 80 24.4 48% 100% 21% 90 27.4 48% 100% 60% 100 30.5 48% 100% 98% 110 33.5 48% 100% 100% 35% 120 36.6 48% 100% 100% 73% 127.3 38.8 48% 100% 100% 100% Boom Length Section Length ft m T4 T3 T2 T1 50 15.2 0% 48% 60 18.3 0% 88% 70 21.3 0% 100% 27% 80 24.4 0% 100% 65% 90 27.4 0% 100% 100% 4% 100 30.5 0% 100% 100% 41% 115.8 35.3 0% 100% 100% 100% Boom Length Section Length ft m T4 T3 T2 T1 50 15.2 48% 2% 60 18.3 48% 42% 70 21.3 48% 51% 30% 80 24.4 48% 51% 50% 18% 90 27.4 48% 51% 50% 55% 102 31.1 48% 51% 50% 100% Boom Length Section Length ft m T4 T3 T2 T1 140 ft (42.7m) T4 T3 T2 T1 127.3 ft (38.8m) Extend Extend T4 T3 T2 T1 Extend 115.8 ft (35.3m) T3 T2 T1 Extend 102 ft (31.1m) 38 ft (11.6m) Base Base 38 ft (11.6m) Base Base 38 ft (11.6m) Base Base T4 T3 T2 T1 Base Extend 38 ft (11.6m) Base 38 ft (11.6m) Base 50.7 15.5 0% 51% 63.7 19.4 0% 51% 50% 76.5 23.3 0% 51% 50% 48% 76.5 ft (23.3m) T3 T2 T1 Base

14 5460 (supersedes 5424)---0506---N3 Main Boom Lift Capacity Charts -- Standard 8,500 lb Counterweight -- Fully Extended Outriggers -- 360 Rotation (All Capacities Are Listed In Pounds) Boom Length 38 50 60 70 76.5/80 90 100 110 120 130 140 9 164,400* 9 10 154,600* 152,100* 117,900 89,700 10 12 129,300* 131,300* 108,800 85,000 85,100** 12 15 102,500 104,600 104,900 78,800 78,400** 57,700 15 20 74,700 77,000 77,400 70,300 76,500** 56,200 49,100 42,500 20 25 54,700 57,900 59,400 60,100 59,700 55,300 45,800 42,500 33,700 29,700 25 30 39,600 43,300 44,400 44,600 44,300 43,800 43,200 38,300 31,200 29,400 24,400 30 35 33,100 34,100 34,900 34,100 35,000 33,500 34,500 30,900 29,100 24,100 35 40 26,100 27,200 27,900 28,100 28,000 28,000 27,500 28,100 26,900 24,000 40 45 22,800 23,500 23,900 23,300 24,000 23,800 23,500 23,100 22,700 45 50 18,900 19,600 20,000 20,200 20,100 19,900 19,600 19,100 18,800 50 55 16,500 16,900 17,100 16,900 16,800 16,400 16,000 15,700 55 60 14,000 14,400 14,600 14,500 14,300 14,000 13,600 13,200 60 65 12,500 12,700 12,500 12,400 12,100 11,700 11,400 65 70 10,800 11,000 10,900 10,800 10,400 10,100 9,700 70 75 9,600 9,500 9,400 9,100 8,700 8,400 75 80 8,400 8,300 8,200 7,900 7,500 7,200 80 85 7,300 7,200 6,800 6,500 6,200 85 90 6,300 6,300 6,000 5,600 5,300 90 95 5,500 5,200 4,800 4,500 95 100 4,800 4,500 4,100 3,800 100 105 3,900 3,500 3,200 105 110 3,300 3,000 2,700 110 115 2,500 2,200 115 120 2,000 1,700 120 125 1,300 125 130 900 130 * Special Conditions Or Wire Rope Required ** 76.5 EM5 mode shown on fully extended outriggers do not exceed 85% of the tipping loads and on tires do not exceed 75% of the tipping loads.