Weather-Resistant Louvres

Transcrição

1 SA3/1/EN/2 Weather-Resistant Louvres for constant volume systems Type WG - AWG - WGE - AWK - WG-F TROX South Africa (Pty) Ltd. 10 Wigford Road Masons Mill Pietermaritzburg Tel. +27 (0) Fax. +27 (0) [email protected] Website:

2 Contents Description Description 2 Construction 3 Installation Details 5 Standard Sizes Drilling Details 7 Product Range 8 Technical Data 9 Order Details 10 WG AWG WGE AWK Weather-resistant louvres give good protection against the direct ingress of rain, leaves and birds. ecause of their design, they cannot prevent the entry of slight quantities of water under certain conditions. Virtual weather-proofing can only be achieved by the subsequent use of eliminators. WG-F 2

3 Construction Type WG AWG WGE AWK WG Frames and blades of formed, galvanised sheet steel Wire mesh screen from galvanised steel, mesh size 20 x 20 mm Flange drilled as standard AWG Frames and blades of extruded aluminium sections Wire mesh screen from galvanised steel, mesh size 20 x 20 mm Flange drilled as standard WGE Frames, blades and wire mesh screen (mesh size 20 x 20 mm) all in stainless steel type No Flange drilled as standard AWK Frames and blades of extruded aluminium sections, natural anodised (E6-C-0) Wire mesh screen of galvanised steel, mesh size 6 x 6 mm Flange drilled as standard Type WG AWG WGE WG WGE AWG a 82.5 b b 82.5 d d c c Free cross-section approx. 60-%, based on x ( m) Type AWK a b a Frame b lade c ottom blade d Wire mesh screen d c Free cross-section approx. 60-%, based on x ( m) 34 3

4 Construction Type WG-F WG-F (steel construction) lades and support mullion in formed galvanised sheet steel; the mullion is also powder coated black (RAL 9005) Mullion is drilled at side and rear for connecting louvre sections together or connecting to site support structure Wire mesh screen from galvanised steel, mesh size 20 x 20 mm WG-F (aluminium construction) lades of extruded aluminium sections Mullion in formed galvanised sheet steel; powder coated black (RAL 9005) Mullion is drilled at side and rear for connecting louvre sections together or connecting to site support structure Wire mesh screen from galvanised steel, mesh width 20 x 20 mm Type WG-F 600 Corner section Centre section 1 a c u4.1 a 125 b b 630 n x n = Number of centre sections free cross-section approx. -% based on x ( m) Corner Section u4.2 b 630 a c u4.1 a lade b ottom blade c Wire mesh screen u4.1 Right hand mullion u4.2 Left hand mullion 630 Dimensions = 600 x Components a u4.2 are supplied in kit form for site assembly. Fixings are included in the scope of supply. 4

5 Installation Details Masonry Subframe Type WG AWG WGE t 2 t 2 t 2 uilders cleat Type AWK Sub-frames only for < 1197 mm and < 497 mm; special fixing straps are available for other dimensional combinations. As delivered Assembly Interval t = flange hole pitch (page 7) Materials: Type WG AWG: Galvanised steel Type WGE: Stainless steel Material: Formed, galvanised sheet steel uilders cleat Installation Dimensions Type WG WGE Type AWG Type AWK + 35-/ / / / / / t t 1 t / / / Opening size without masonry subframe + 15/ Opening size without masonry subframe + 15/ Opening size without masonry subframe + 10/ Type WG-F X Secondary structure, e.g. angle section (if required) Secondary structure, e.g. U-channel (if required) x = (n x )

6 Installation Details Type WG AWG WGE (split on or dimension) If the dimension is more than 1985 mm or the dimension more than 1980 mm, then the louvre is sub-divided into two sections which can then be mounted either side by side or one on top of the corner. Type AWG (linear construction) Type AWG louvres are available in linear construction if the dimension is more than 1985 mm. The width of the separating mullions is 2 x 20 mm. Linear louvre construction for > mm consists of two end sections. Linear louvres construction for > 3985 mm consists of two end sections and any number of centre sections. Masonry subframes may be used for installation if required. Type WG AWG WGE Type AWG Split on dimension ( 1 = ) A Split on dimension ( 1 = ) E = End section = mm in increments of 100 M = Centre section = 2000 mm Detail A E M E Separating mullion 40 Special Masonry Subframe shown split on dimension Special Masonry Subframe + 35/ / / + 35 or / / + 15 or / Opening size without masonry subframe / or / Opening size without masonry subframe + 15-/

7 Standard Sizes Drilling Details Type WG AWG WGE Type AWG (linear construction) Type AWK A 28 t 2 t 2 t 3 ~ [ 9 ~ [ 9 t 3 t 2 t 2 20 t 2 t 2 [ 4.5 A t 3 [ t E t 1 t t 4 t 4 t 1 t ~ [ M = 2000 Type WG AWG WGE Number of holes t 1 per per -side -side t 2 t Type AWK In increments of In increments of 100 In increments of In increments of 100 Number of holes per -side Number of holes per -side t 1 arranged on centre t Max. or dimension combinations that can be used Type WG-F Corner piece / Type WG AWG WGE (Split on or dimensions) 1 1 Number of holes and pitch as finite louvre Type AWG (Linear construction) E Number of holes per E-side Number of holes and pitch on dimension as type AWG t In increments of Types WG AWG WGE WG-F: Any combination of dimensions, 1 and, 1 listed above can be supplied 7

8 Product Range Type Construction Wall frame Surface P1 S2/S3 Powdercoated anodised WG 2) asic construction 11 WG 1 2) WG plus insect screen in galvanised steel 11 WG-M Steel asic construction, split on dimension 12 WG 1-M Construction WG-M plus insect screen in galvanised steel 12 WG-M asic construction, split on dimension 13 WG 1-M WG-M plus insect screen in galvanised steel 13 AWG 2) asic construction 11 AWG 1 2) AWG plus insect screen in galvanised steel 11 AWG 2 2) AWG but with wire mesh screen in stainless steel AWG 3 2) AWG but with wire mesh screen and insect screen in stainless steel AWG-M asic construction, split on dimension 12 AWG 1-M AWG-M plus insect screen in galvanised steel 12 AWG 2-M AWG-M but with wire mesh screen in stainless steel AWG 3-M Aluminium AWG-M but with wire mesh screen and insect screen in stainless steel AWG-M Construction asic construction, split on dimension 13 AWG 1-M AWG-M plus insect screen in galvanised steel 13 AWG 2-M AWG-M but with wire mesh screen in stainless steel AWG 3-M AWG-M but with wire mesh screen and insect screen in stainless steel AWG- Linear construction 14 AWG 1- AWG- plus insect mesh in galvanised steel 14 AWG 2- AWG- but with wire mesh screen in stainless steel AWG 3- AWG- but with wire mesh screen and insect screen in stainless steel WGE asic construction 15 WGE 1 WGE plus insect screen in stainless steel WGE-M Stainless Steel asic construction, split on dimension 16 WGE 1-M Construction WGE-M plus insect screen in stainless steel WGE-M asic construction, split on dimension 17 WGE 1-M WGE-M plus insect screen in stainless steel AWK Aluminium asic construction 1) 18 3) E6-C-0 Construction WG-F-E Steel asic construction, corner section 1) 1) WG-F-T Construction asic construction, centre section 1) 1) WG-F-E-AL asic construction, corner section 1 1) WG-F-E-AL 2 Aluminium WG-F-E-AL but with wire mesh screen in stainless steel ) WG-F-T-AL Construction asic construction, centre section 1) WG-F-T-AL 2 WG-F-T-AL but with wire mesh screen in stainless steel ) 1) Mullion only in RAL 9005 Finish on request: P1 = Powder coated to RAL colour (coating thickness approx µm) Price on request 3) Subframes only for 1197 mm and 497 mm; special fixing straps are available for other dimensional combinations. 2) Louvre also for use in combination with multi-leaf and pressure relief dampers (see leaflet No. 3/4/EN/..) S2/S3 = anodised to Euras-standard Colours: C- 0 = Natural C-33 = Medium bronze (coating thickness approx. 20 µm) C-31 = Pale bronze C-34 = Dark bronze Finish: surface etched (E6) C-32 = Light bronze C-35 = lack S2 = e.g. E6-C-33 S3 = E6-C-0 8

9 Technical Data Nomenclature v in m/s: Air velocity based on cross section A A in m 2 : Flow cross section: WG WGE AWG: x ( m) AWK: x ( m) WG-F: x ( m) (use W and dimensions in m) i p t in Pa: Total pressure drop L W = L WO + K in d/oct.: Octave sound power level related to A L WO in d/oct.: As before, but related to A = 1.0 m 2 L WA = L WAO + K in d(a): A-weighted sound power level related to A L WAO in d(a): As before, but related to A = 1.0 m 2 L W NC = L W NCO + K : NC rating of sound power level related to A L W NCO : As before, but related to A = 1.0 m 2 K f : Sound power level correction for octave, d(a) or NC values at flow cross section greater than or smaller than 1.0 m 2 in z: Octave band centre frequency Example Data given: Louvre type WG, installation type = 585 mm, = 495 mm, A 0.24 m 2 v = 3 m/s Required: Total pressure drop i p t A-weighted sound power level L WA Octave band sound power level of regenerated noise L W NC rating of sound power spectrum L W NC Result: i p t = Pa (from diagram) L WA = 55 6 = 49 d(a) f in z L W in d/oct L W NC 52 6 = 46 Type WG WGE AWG AWK Sound Power Level Spectra i p t i p t Pa Pa Type WG-F L W NCO L W NCO v L WAO in d(a) Installation type: + D m/s L WAO in d(a) A + Installation type: D C m/s A + C i p t Type Installationstype Sound Power Level Correction Values A in m K Installation Types Duct installation -x- v in m/s A WG WGE AWG AWK Sound power level (L WO in d/oct., N O = W) A i p t Plenum installation WG-F f = f = A C D C D v All technical details refer to the basic design. 9

10 Order Details Order Codes AWG / 1 / 585 x 1155 / 11 / Without WMS 1 - WMS 1 x Masonary Subframe 0 - Without Subframe 0 - Mill Finish 1 - Natural Anodised 2 - Coated with Ral WG-WGE / 1 / 585 x 1155 / 11 / Without WMS 1 - WMS 1 x Masonary Subframe 0 - Without Subframe 0 - Galvanised Stainless Steel 1 - Natural Anodised 2 - Coated with Ral AWK / 1 / 497 x 397 / Without WMS 1 - WMS 1 x Mill Finish 1 - Natural Anodised 2 - Coated with Ral Specification Text Weather resistant louvres for protection against direct ingress of rain, leaves and birds into the intake and discharge openings of air conditioning systems; essentially comprising border frame with inset, rain resistant blade sections and wire mesh screen on rear. Constructions an materials: See pages 3 and 4 Masonry subframe and construction variations, e.g. linear construction anodised finish: See page 8 Make: TROX Type: See page 8 Order Example Make: TROX Type: AWG / 1 / 1 x 1 / 11 / 2 / RAL 9010 Qty: 4 10

11 Notes 11